Cisco Systems Explore Cisco Unified Video Advantage with Cisco VT Cameras II and III

Data Sheet

●Cisco IP Communicator 2.0 or 2.1 required when using Cisco Unified Video Advantage

associated with Cisco IP Communicator

*Cisco Unified Video Advantage is supported on Cisco IP Communicator and on all video-enabled Cisco Unified IP Phones running the SCCP protocol and firware which supports video. Cisco Unified Video Advantage is not supported on Cisco Unified IP Phones running the SIP protocol. The phone must be CDP and CAST capable. Check Cisco Unified IP Phone data sheets and release notes for updated Cisco Unified Video Advantage support information.

Cisco VT Camera II Specifications

You can enhance communications, simplify installation, and reduce administrative support requirements with the included Cisco VT Camera II (see figure 4); its specifications follow:

●640 x 480 Video Graphics Array (VGA) sensor for improved video quality

●Fixed focus

●USB 2.0-compliant interface with 6-foot cable

●Privacy shade included

●Versatile base that allows camera to be mounted on a flat panel display or positioned on a flat surface

●Restriction of Hazardous Substances (RoHS)-compliant

Figure 4. Cisco VT Camera II

Cisco VT Camera II Compliance and Safety

Table 1 lists Cisco VT Camera II compliance and safety specifications.

Table 1.	Cisco VT Camera II Compliance and Safety Specifications
Specification		Description
Regulatory compliance		CE Marking indicating compliance with the 89/366/EEC and 73/23/EEC directives, which includes
		the following safety and EMC standards:
Safety UL		● UL 60950
		● CAN/CSA-C22.2 No. 60950
		● EN 60950
		● IEC 60950
		● AS/NZS 60950

© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 7