59
Maintaining and Monitoring
Linksys EA-Series
3.
Click the Status tab, then click the Local Network page. Your local
network’s IP address information and the DHCP server settings are
displayed. (Screen from IPv6-enabled router shown.)
4.
Click DHCP Client Table to display the currently assigned IP addresses.
5.
Click the Status tab, then click the Wireless Network page. Your wireless
network status is displayed.
6.
Click the Status tab, then click the Ports page. The link status and speed
for each of the Ethernet ports and the Internet port are displayed.
How to disable the Ethernet port status lights
Why would I want to disable the Ethernet port status lights? Depending
on the placement of the router in a home, some users might find the lights
distracting. You can easily disable the lights using Cisco Connect, but you can
also disable them using the browser-based utility.
To disable the lights using Cisco Connect:
1.
In Windows, click Start, All Programs, then click Cisco Connect.
– OR –
On a Mac, open the Applications folder, then click Cisco Connect.
The Cisco Connect main menu opens.
2.
Under Router Settings, click Change.
3.
Under Port lights, click off, then click Finish.
To disable the lights using the browser-based utility:
For ALL
Setup > Basic Setup
1.
Log into the browser-based utility (see “How to open the browser-based
utility” on page 20).
2.
Click the Setup tab, then click the Basic Setup page.
3.
Set Rear Port Lights to off, then click Save Settings at the bottom of
the page.