Cisco Systems DPQ2160DOCSIS20 Basic Installation, Wall Mounting, Cable Modem, DPQ2160 DOCSIS

Models: DPQ2160 DPQ2160DOCSIS20 4031762 EPC3925

1 2
Download 2 pages 6.21 Kb
Page 2
Image 2
Basic Installation

Basic Installation

 

 

1

RF coaxial cable is not included

Splitter is not included

2

 

 

Cable In

 

 

 

To

To

 

 

Verify that you have an

Set-top

Modem

Connect the RF coaxial cable to the

Optional: Use a two-way splitter and RF

active cable connection.

Cable port on the modem and connect

Wall Mounting

Follow these guidelines for mounting the modem on the wall:

Select a location within 5 feet (1.6 m) of an electrical outlet.

Check that the selected electrical outlet cannot be interrupted by a wall switch.

Use the supplied cables to connect the modem to your PC.

Leave sufficient clearance between the bottom of the modem and the floor or shelving.

Note: Mounting hardware and tools are not included.

Required for mounting on drywall (sheetrock):

Two #6 screws

Two 1/4-inch (6 mm) drywall anchors

Drill with 1/4-inch (6 mm) bit

Required for mounting to plywood or studs:

Two 1-inch (25 mm) wood screws with head diameter between 3/16-inch and 1/4-inch (4.5 mm and 6 mm)

Drill with 1/8-inch (3 mm) bit

coaxial cable to connect your active cable

the other end to the cable outlet in your

to both a set-top and the modem.

home.

1RF coaxial cable is not includedWall Mounting 2Ethernet 3USB cable is not included 6

3

Cut along the dotted 4

4 inches (102 mm) 5

line or makeUSB

OR

LeftEthernet

Use the template to position the modem

Use the appropriate screws for your wall

Carefully position the modem onto the

and to drill holes for mounting it to the wall.

material and remove the template.

screws.

Insert the AC power cord into the

Plug the AC power

Select either Ethernet or USB to connect to your PC.

Power input on the modem.

cord into the wall.

Notes:

 

 

 

 

• An Ethernet cable is included with the cable modem.

 

 

• You will need an optional USB cable (not included) if you

 

 

want to connect your cable modem to a USB port on

 

 

your PC.

6

Ethernet

 

USB cable is not included 6

 

USB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For Ethernet, insert the Ethernet cable

For USB, insert a USB cable (not included) into

into an Ethernet port on your PC and

a USB port on your PC and then into the USB

then into the Ethernet port on the

port on the modem.

modem.

Note: IfyourPCdoes nothavethenecessary

 

 

USB driver, contact your service provider for

 

assistance.

Cut along the dotted

 

Top

 

4 inches (102 mm)

line or make

 

LeftRight

a

 

Cable Modem

photocopyof

 

 

 

DPQ2160 DOCSIS 2.0

this

 

Wall Mounting Template

template and tape

 

Bottom
to wall.

 

 

Page 2
Image 2
Cisco Systems DPQ2160DOCSIS20 Basic Installation, Cable Modem, DPQ2160 DOCSIS, Wall Mounting Template, Ethernet, Left