Cisco Systems Product Serial Number Location for Cisco IAD2430 Series IADs, Chassis Grounding

Chapter 1 Overview of Cisco IAD2430 Series IADs

Physical Description and LEDs

Table 1-3 Cisco 2430 Series IAD LEDs (Cisco 2432-24FXS shown)

No	LED/Color	Description
3	Link—green	Indicates link activity
	100—green	100BASE-T active
	FDX—green	Green when full duplex active, off when in half-duplex mode
4	ACT—green	Blinking green during packet transfer and interrupts
	SYS—green	Blinking green for power on and self-test, solid green thereafter
	PWR—green	Solid green when system has power

Product Serial Number Location for Cisco IAD2430 Series IADs

The serial number label for the Cisco IAD2430 Series IADs is located on the rear of the chassis, in the middle-left side. (See Figure 1-14.)

Figure 1-14 Serial Number Locations

A A A N N N N X X X X

IAD2431-8FXS

A A A N N N N X X X X

103054

Note The serial number for Cisco IAD2430 Series IADs is 11 characters long

Chassis Grounding

Chassis grounding is provided through the power cable, which uses a standard grounding plug. The chassis is also equipped with two multi 4 x 0.7 screw terminals for chassis grounding. The accessory kit contains a crimp-type ground lug that attaches to the two screw terminals. For more information, refer to the “Installing the Ground Connection” section on page 3-11.

Port Numbering Conventions

Port numbering conventions for Cisco IAD2430 series IAD are as follows:

•An external compact flash card is numbered CF 0.

•10/100BASE-T ports are numbered 10/100BASE-T 0/0 and 10/100BASE-T 0/1 from right to left.

•T1/E1 ports are numbered T1 or E1 1/0 and T1 or E1 1/1 from right to left.

Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide

1-10 OL-4234-05