Cisco Systems IAD2430 Series Port, Interface Configurations, Interface To, Services Supported

Chapter 1 Overview of Cisco IAD2430 Series IADs

Interfaces and Service Capabilities

Table 1-2 Cisco IAD2430 Series Interfaces and Service Capabilities

Port	Interface Configurations	Interface To	Services Supported		Details
Console	EIA/TIA-232 asynchronous	ASCII terminal	Local administrative		RJ-45 physical interface
Port 0/0	serial (DCE1)	Personal computer	access
Auxiliary	EIA/TIA-232 asynchronous	Modem	Remote administrative		RJ-45 physical interface
Port 0/1	serial (DTE2)		access
			Data backup
Fast Ethernet	10/100BASE-T (802.3)	LAN	Data		RJ-45 physical interface
Port 0/0, 0/1
RJ-21	FXS (loop-start or	Analog phone, fax,	Analog voice/fax or		Provides battery
8, 16, or 24	ground-start)	or modem	modem		RJ-21 physical interface
analog FXS
		Network side of key			8-port FXS, on premise only
voice ports
		system
					16-port FXS, on premise only
Port 2/0 to		Network side of
2/23					24-port FXS, on premise only
		analog PBX
T1/E1 trunk	Channelized T1/E1	WAN	Service types:		Built-in CSU/DSU5
Port 0,1		Carrier network	•	ATM	T1.403-compliant
			•	Cisco HDLC3	RJ-48C/CA81A physical
			•	PPP3	interface
			Transport types:		Supports as many as 24 DS0s
			•	TDM4 trunk
			•	Leased lines
WIC/VIC	HDLC-based data	WAN	Cisco HDLC		Physical interfaces:
slot		Carrier network	PPP6		•	EIA/TIA-232
S0 (serial)		User equipment	VoIP over PPP		•	EIA/TIA-530/530A
					•	EIA/TIA-449
					•	V.35
					•	X.21
CF7 Slot 0			Flash memory		Compact flash card

1.DCE = data communications equipment

2.DTE = data terminal equipment

3.HDLC = High-Level Data Link Control

4.TDM = time-division multiplexing

5.CSU/DSU = channel service unit/data service unit

6.PPP = Point-to-Point Protocol

7.CF = compact flash memory

Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide

1-8 OL-4234-05