Blomberg CTE 36500 Troubleshooting, Use & Care Manual, English, Problem, Cause, Possible Remedy

			Use & Care Manual
				ENGLISH
	Troubleshooting
Problem	Cause		Possible Remedy
	Cooktop not connected to proper		Have electrician verify that the proper
	electrical circuit.		rated cooktop voltage is being supplied
			to the cooktop. Have electrician replace
	Fuse is blown or circuit breaker is tripped.		fuse or reset circuit breaker.
Nothing works	No electricity to the cooktop.		Have electrician check your power
			supply.
	Cooktop is in lockout mode.		Unlock cooktop.
	Cooktop is connected to 120 volt power		Have electrician connect cooktop to the
	supply.		proper rate cooktop voltage.
Heating elements do not heat	Power supply connection is loose.		Have electrician tighten the connections
properly			at the junction box.
	Improper cookware is being used.		Select proper cookware as outlined in
			the Cooktop Operation section of this
			manual.
Heating elements cycle off	Heating element temperature limiters are		This is a normal operating condition,
	temporarily shutting off the elements due		especially during rapid heat-up
even when elements are	to exceeding the maximum allowable		operations. The element will cycle back
turned to their highest settings	temperature.	on automatically after it has cooled
		sufficiently.
	Under direct or bright lighting, you will		These are normal properties of black
Glass ceramic surface is see-	sometimes be able to see through the		ceramic glass panels.
through or appears to be red	glass and into the chassis due to its
in color.	transparent quality. You may also notice a
	red tint under these conditions

18