Use & Care Manual
ENGLISH
The control is managing an error detection system, mainly the checking the functionality of the electronics itself (keyboard functionality, ambient light conditions, communication between the two boards and the working temperature of the control).
As soon as a failure is detected, the control stops all the heating elements and declares the error code, showing on the proper display “F” and a second letter alternatively in order to identify the fault cause (see the table below).
FA, FC | Key Error |
FE, Ft | Temperature sensor failure |
Fc | Over temperature |
Fr | Relay Error |
FH | Control error (EEPROM) |
FJ | Key Error |
F0 | Software Error |
FL | Keyboard Error (Ambient Light) |
FU | Key Error |
Fd | Led On/Off Test Error |
Fb | Keyboard Error |
F5 | Communication Error |
“Fc” Allow the cooktop cool down.
the commands. Try to remove the power and the restore it. If the problem persist call service.
In case of other control errors, remove and the restore the mains power. If the problem persist call service.
Assistance or Service
Before calling for assistance or service, please check "Troubleshooting." It may save you the cost of a service call.
If you still need help, follow the instructions below. When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request.
Service Data Record
For authorized service or parts information see paragraph WARRANTY for Home Appliances".
The location of the serial tag is below the cooktop box. Now is a good time to write this information in the space provided below. Keep your invoice for warranty validation.
Model Number _____________________
Serial Number ______________________
Date of Installation or Occupancy ______________
19
