-xix
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-29225-01
Preface

Audience

This guide is for the networking professional who installs and manages Cisco Aironet Access Points. To
use this guide, you should have experience working with the Cisco IOS software and be familiar with
the concepts and terminology of wireless local area networks.
The guide covers Cisco IOS Releases 15.2(4)JA , 12.4(25d)JA, and 12.3(8)JEE.
Cisco IOS Releases 15.2(4)JA supports the following autonomous 32 Mb platforms:
•AP 1040
•AP 801
•AP 802
•AP 1140
•AP 1550
•AP 1600
•AP 2600
•AP 3500
•AP 3600
•AP 1260
Note This guide does not cover lightweight access points. Configuration for these devices can be found in the
appropriate installation and configuration guides on Cisco.com.

Purpose

This guide provides the information you need to install and configure your access point. This guide
provides procedures for using the Cisco IOS software commands that have been created or changed for
use with the access point. It does not provide detailed information about these commands. For detailed
information about these commands, refer to the Cisco IOS Command Reference for Cisco Aironet Access
Points and Bridges for this release. For information about the standard Cisco IOS software commands,
refer to the Cisco IOS software documentation set available from the Cisco.com home page at Support
> Documentation.