Implementing OSPF on Cisco IOS XR Software
How to Implement OSPF on CiscoIOS XR Software
RC-209
Cisco IOS XR Routing Configuration Guide
Configuring OSPF Shortest Path First Throttling
This task explains how to configure SPF scheduling in millisecond intervals and potentially delay SPF
calculations during times of network instability. This task is optional.
Prerequisites
See the “OSPF Shortest Path First Throttling” section on page 181 for information about OSPF SPF
throttling.
SUMMARY STEPS
1. configure
2. router ospf process-name
or
router ospfv3 process-name
3. router-id {ipv4-address | interface-type interface-instance}
4. timers throttle spf spf-start spf-hold spf-max-wait
5. area area-id
6. interface type instance
7. end
or
commit
8. show ospf [process-name]
or
show ospfv3 [process-name]
DETAILED STEPS
Command or Action Purpose
Step1 configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step2 router ospf process-name
or
router ospfv3 process-name
Example:
RP/0/RP0/CPU0:router(config)# router ospf 1
or
RP/0/RP0/CPU0:router(config)# router ospfv3 1
Enables OSPF routing for the specified routing process and
places the router in router configuration mode.
or
Enables OSPFv3 routing for the specified routing process
and places the router in router ospfv3 configuration mode.
Note The process-name argument is any alphanumeric
string no longer than 40 characters.