1-19
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Chapter 1 Introducing IP/TV Server s
Cisco IP/TV Broadcast Servers
LED Indicators
Tabl e 1-11 describ es the Cisco IP/TV 3427 Broadcast Server front panel LEDs
and their functions.
Table1-10 Cisco IP/TV 3427 Broadcast Server Front Panel Control Buttons
Item Description
2Power control button Turns on IP/TV Server. To power down IP/TV Server, you might need
to press the power button for a few seconds.
3Reset button Reboots IP/TV Server. You might need to use a pen or the end of a
straightened paper clip to press the button.
Note This is a hardware reset button and does not restore the device
to the factory default software settings.
9CD eject button Releases a CD from the drive. The CD-ROM drive is used for
software upgrades and disaster recovery.
Table1-11 Cisco IP/TV 3427 Broadcast Server Front Panel LEDs
LED Color State Description
1Power on Green On Indicates that power is flowing to IP/TV
Server.
Flashing Indicates that IP/TV Server is in
standby mode.
4SCSI or IDE bus
activity
Green On Indicates that there is activity on the SCSI or
IDE bus.
5System identification Blue Off This LED is not used in IP/TV Server.
6Information Amber On Indicates that the information log contains
information about certain conditions in
IP/TV Server that might affect performance.
7System error Amber On Indicates that a system error has occurred. An
LED on the diagnostic LED panel will also be
on to further isolate the error.
8CD-ROM drive activity Green On Indicates that the CD-ROM drive is in use.