Chapter3 Installing the IP/TV Server
Installing Cisco IP/TV 3427 Broadcast Server Units
3-20
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Rack Requirements
Install your IP/TV Server in a rack that meets the following requirements:
•Four posts, 19 inches (48.3 cm) wide
•Minimum depth of 28.27 inches (71.8 cm) and maximum de pth of 30 inches
(76.2 cm) between the front and rear moun ting flanges
•Minimum depth of 2.76 inches (7.0 cm) between the front mounting flange
and inside of the front door (for cabinet-style racks)
•Minimum depth of 6.18 inches (15.7 cm) between the rear mounting flange
and inside of the rear door (for cabinet-sty le racks)
Racks are marked in vertical increments of 1.75 inches (4.44 cm). Each increment
is referred to as a rack unit (RU). A 1-RU device is 1.75 inches (4.44 cm) tall.
Tools and Parts Required
A sliding rail rack-mount kit is included in your shipping container accessor y box.
The rack-mount kit is suitable for mounting Cisco IP/TV 3427 Broadcast Server
units in 19-inch (48.26-cm) 4-post equipment r acks. (See the “Rack
Requirements” section on page 3-20.)
You need the following tools for the installation:
•Flat-blade screwdriver
•Phillips screwdriver
Figure 3-16 shows the items that you need to install the IP/TV Server in the rack
or cabinet. If any items are missing or damaged, con tact your place of purchase.