Chapter 1 Cisco Unified Videoconferencing 3545 System Chassis Overview
About the Rear Transition Module
Figure
| SERIAL | GK Reg |
| |
|
|
|
| |
| RST | ALARM ACT | SWAP | |
10/100 Base | RDY | |||
| SERIAL | MC |
| |
|
|
|
| |
| RST | ALARM ACT | SWAP | |
10/100 Base T | RDY | |||
| SERIAL | GK Reg | CD |
|
|
|
|
| |
| RST | ALARM ACT | SWAP | |
10/100 Base | RDY | |||
| SERIAL | GK Reg | CD |
|
|
|
|
| |
| RST | ALARM ACT | SWAP | |
ETHERNET 1 | RDY | |||
About the Rear Transition Module
157268
The rear panel of the Cisco Unified Videoconferencing 3545 chassis contains four slots for the insertion of Rear Transition Module (RTM) boards that connect to the chassis backplane. The RTM provides a Circuit Switch Network connection.
Viewing System Indicators
You can view
Note You can also monitor chassis functions remotely via the web user interface of the MCU or gateway installed in the top slot of the Cisco Unified Videoconferencing 3545 chassis. If you install a Cisco Unified Videoconferencing 3545 EMP Enhanced Media Processor in the top slot of the Cisco Unified Videoconferencing 3545 chassis, monitoring via the web is not available.
System Power Indication
The POWER LED lights green to indicate that the power supply is operating normally. Red indicates that one of the power supply units is malfunctioning.
System Alarm Indication
The ALARM LED lights green to indicate that the system is functioning normally. Red indicates that a system failure has been detected.
System Fan Indication
The FAN LED lights green to indicate that the fans are operating properly. Red indicates a fan failure.
Platform Guide for Cisco Unified Videoconferencing 3545 System Chassis
| ||
|
