Cisco Systems OL-10282-01 Insert a new PSU, sliding it into the connectors inside the PSU slot

Chapter 1 Cisco Unified Videoconferencing 3545 System Chassis Overview

Cisco Unified Videoconferencing 3545 Chassis Power Supply

Figure 1-4 Removing a Power Supply Unit

POWER

POWER

	157278
Step 4	Insert a new PSU, sliding it into the connectors inside the PSU slot.
Step 5	Press firmly on the new PSU to ensure that the connectors have engaged properly and that the outside of
	the PSU is in line with the chassis rear panel.
Step 6	Check to see that the green LED lights up on the new PSU and on the chassis front panel.
Step 7	Tighten the screw.

Platform Guide for Cisco Unified Videoconferencing 3545 System Chassis

OL-10282-01 1-5