Cisco Systems OL-10729-01 appendix VPLS Multipoint EWS with BPDU Tunneling, A-13, Up-E, N-Pe

Appendix A Sample Configlets

VPLS (Multipoint) EWS with BPDU Tunneling

VPLS (Multipoint) EWS with BPDU Tunneling

Configuration

Configlets

Comments

•Service: L2VPN/Metro Ethernet

•Feature: VPLS (multipoint) EWS with BPDU tunneling

•Device configuration:

–The N-PE is a CISCO7600 with IOS 12.2(18)SXF, Sup720-3BXL

–The U-PE is a CISCO3750ME with IOS 12.2(25)EY1. No port security, no tunneling.

–VPLS Multipoint VPN, with VLAN 767

–QinQ UNI

–C3750ME (FA1/0/12 – FA1/0/23) <–> C7600 (FA2/18)

UP-E	N-PE
system mtu 1522	l2 vfi vpls_ews-89019 manual
!	vpn id 89019
errdisable recovery interval 33	neighbor 99.99.8.99 encapsulation mpls
!	!
vlan 776	vlan 776
exit	exit
!	!
interface FastEthernet1/0/12	interface FastEthernet8/17
no cdp enable	switchport trunk allowed vlan
no keepalive	1,451,653,659,766-768,772-776,878
switchport	!
switchport access vlan 776	interface Vlan776
switchport mode dot1q-tunnel	no ip address
switchport nonegotiate	description VPLS EWS
l2protocol-tunnel cdp	xconnect vfi vpls_ews-89019
l2protocol-tunnel stp	no shutdown
l2protocol-tunnel vtp
l2protocol-tunnel shutdown-threshold cdp 88
l2protocol-tunnel shutdown-threshold stp 64
l2protocol-tunnel shutdown-threshold vtp 77
l2protocol-tunnel drop-threshold cdp 34
l2protocol-tunnel drop-threshold stp 23
l2protocol-tunnel drop-threshold vtp 45
no shutdown
spanning-tree portfast
spanning-tree bpdufilter enable

•The N-PE is a 7600 with an OSM or SIP-600 module

•The VFI contains all the N-PEs (neighbors) that this N-PE talks to.

•The VPLS EWS UNI is the same as L2VPN (point-to-point) EWS UNI.

•The SVI is the same as VPLS ERS SVI.

	Cisco IP Solution Center Metro Ethernet and L2VPN User Guide, 4.2
OL-10729-01		A-13