Chapter 12 IP Video Telephony Configuration
Cisco Unified CallManager Configuration for IP Video Telephony
Region A – SJC Cisco Unified CallManager – Region B – Transcoder – Region C – Intercluster trunk – Region D – transcoder – Region E – DFW Cisco Unified CallManager – Region F
The regions include the following devices:
•Region A
•Region B
•Region C
•Region D
•Region E
•Region F
Table | SJC Regions Matrix |
|
| |
|
|
|
|
|
|
| Region A | Region B | Region C |
|
|
|
|
|
Region A |
| G.711/384 | G.711/384 | G.711/384 |
|
|
|
|
|
Region B |
| G.711/384 | G.711/384 | G.729/384 |
|
|
|
|
|
Region C |
| G.711/384 | G.729/384 | G.729/384 |
|
|
|
|
|
Table
Table | DFW Regions Matrix |
|
| |
|
|
|
|
|
|
| Region D | Region E | Region F |
|
|
|
|
|
Region D |
| G.729/384 | G.729/384 | G.711/384 |
|
|
|
|
|
Region E |
| G.729/384 | G.711/384 | G.711/384 |
|
|
|
|
|
Region F |
| G.711/384 | G.711/384 | G.711/384 |
|
|
|
|
|
If the H.323 video endpoint in SJC called directly to an H.323 video endpoint in DFW, a transcoder would not be invoked and video would be available for the call. However, in this scenario, a transcoder is invoked before the call is transferred. Therefore, video is not available after the call transferred.
Note This transfer scenario applies to all calls transferred via Cisco Unity Automated Attendant and via Cisco IPCC Express.
Video Deployment with RSVP
You can use Cisco RSVP Agent to control video bandwidth. Such a deployment could be use in a situation where an audio device can use only G.711 and audio transcoding is necessary.
Cisco RSVP Agent is an
|
| System Test Architecture Reference Manual for IP Telephony |
|
| ||
|
|
| ||||
|
|
|
|
| ||
|
|
|
|