Cisco Systems OL-21011-01 manual Device Information, Description, Udi

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely

Configuring the Cisco Unified IP Phone to use HTTP/HTTPS Protocols

Configuring the Cisco Unified IP Phone to use HTTP/HTTPS Protocols

The Cisco Unified IP Phone can be configured to use:

•The HTTPS protocol only

•The HTTP or HTTPS protocols

If your Cisco Unified IP Phone is configured to use the HTTP or HTTPS protocols (the second case above), use http://IP_address or https://IP_address for the phone’s web access.

Device Information

		The Device Information area on a phone’s web page displays device settings and related information for
		the phone. Table 8-1describes these items.
		To display the Device Information area, access the web page for the phone as described in the Accessing
		the Web Page for a Phone, page 8-2, and then click the Device Information hyperlink.
Table 8-1	Device Information Area Items
Item		Description
MAC Address		Media Access Control (MAC) address of the phone
Host Name		Unique, fixed name that is automatically assigned to the phone based on its MAC address
Phone DN		Directory number assigned to the phone
App Load ID		Identifier of the firmware running on the phone
Boot Load ID		Identifier of the factory-installed load running on the phone
Version		Version of the firmware running on the phone
Expansion Module 1 Phone load ID for the first Cisco Unified IP Phone Expansion Module 7914, if connected to the
		phone
Expansion Module 2 Phone load ID for the second Cisco Unified IP Phone Expansion Module 7914, if connected to the
		phone
Hardware Revision		Revision value of the phone hardware
Serial Number		Serial number of the phone
Model Number		Model number of the phone
Message Waiting		Indicates if there is a voice message waiting on any line for this phone
UDI		Displays the following Cisco Unique Device Identifier (UDI) information about the phone:

•Device Type—Indicates hardware type. For example, phone displays for all phone models

•Device Description—Displays the name of the phone associated with the indicated model type

•Product Identifier—Specifies the phone model

•Version Identifier—Represents the hardware version of the phone

The Version Identifier field might display a blank screen if the user is using an older model Cisco Unified IP Phone, because the hardware does not provide this information.

•Serial Number—Displays the phone’s unique serial number

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)

8-4 OL-21011-01