Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Disabling and Enabling Web Page Access
•Streaming
–Stream 1, Stream 2, Stream 3, Stream 4, or Stream
Disabling and Enabling Web Page Access
For security purposes, you may choose to prevent access to the web pages for a phone. If you do so, you will prevent access to the web pages that are described in this chapter and to the Cisco Unified Communications Manager User Options web pages.
You can enable or disable access to the web pages for an individual phone, a group of phones, or to all phones in the system.
To enable or disable access to the web pages for all phones on the system, choose System > Enterprise Parameters and select Enabled or Disabled from the Web Access
To enable or disable access to the web pages for a group of phones, choose Device > Device Settings > Common Phone Profile to create a new phone profile or to update an existing phone profile, select Enabled or Disabled from the Web Access
To enable or disable access to the web pages for a phone, follow these steps from Cisco Unified Communications Manager Administration.
Procedure
Step 1 Choose Device > Phone.
Step 2 Specify the criteria to find the phone and click Find, or click Find to display a list of all phones. Step 3 Click the device name to open the Phone Configuration window for the device.
Step 4 Scroll down to the Product Specific Configuration section. From the Web Access
Step 5 Click Update.
Note Some features, such as Cisco Quality Report Tool, do not function properly without access to the phone web pages. Disabling web access also affects any serviceability application that relies on web access, such as CiscoWorks.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
|
| ||
|
|
