Appendix C Technical Specifications

Cable Specifications

Table C-1

Physical and Operating Environment Specifications for the Cisco Unified IP Phone 6901 (continued)

 

 

 

 

 

Specification

 

Value or Range

 

 

 

 

 

Cables

 

Category 3/5/5e for 10-Mbps cables with four pairs

 

 

Category 5/5e for 100-Mbps cables with four pairs

 

 

Note Cables have four pairs of wires for a total of eight conductors.

 

 

 

 

Distance Requirements

As supported by the Ethernet Specification, it is assumed that the maximum cable length

 

 

between each Cisco Unified IP Phone and the switch is 100 meters (330 feet).

 

 

 

 

 

 

Table C-2shows the physical and operating environment specifications for the Cisco Unified IP Phone

 

6911.

 

 

 

Table C-2

Physical and Operating Environment Specifications for the Cisco Unified IP Phone 6911

 

 

 

 

Specification

 

Value or Range

 

 

 

Operating temperature

23° to 113°F (-5° to 45°C)

 

 

 

Operating relative humidity

10% to 90% (non-condensing)

 

 

 

Storage temperature

-13° to 158°F (–25° to 70°C)

 

 

 

 

Height

 

8.07 in. (20.5 cm)

 

 

 

 

Width

 

7.4 in. (18.8 cm)

 

 

 

 

Depth

 

5.76 in. (14.64 cm)—Excluding the handset

 

 

 

 

Weight

 

1.53 lb (697 g)—Black handset phone

 

 

1.65 lb (750.3 g)—White handset phone

 

 

 

 

Power

 

100-240 VAC, 50-60 Hz, 0.5 A—When using the AC adapter

 

 

48 VDC, 0.2 A—When using the in-line power over the network cable

 

 

 

 

Cables

 

Category 3/5/5e for 10-Mbps cables with 4 pairs

 

 

Category 5/5e for 100-Mbps cables with 4 pairs

 

 

Note Cables have 4 pairs of wires for a total of 8 conductors.

 

 

 

Distance Requirements

As supported by the Ethernet Specification, it is assumed that the maximum cable length

 

 

between each Cisco Unified IP Phone and the switch is 100 meters (330 feet).

 

 

 

 

 

Cable Specifications

RJ-9 jack (4-conductor) for handset connection.

RJ-45 jack for the LAN 10/100BaseT connection (labeled 10/100 SW on the Cisco Unified IP Phone 6901 and 6911).

RJ-45 jack for a second 10/100BaseT compliant connection (labeled 10/100 PC on the Cisco Unified IP Phone 6911).

48-volt power connector.

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

 

C-2

OL-24582-01

 

 

 

Page 2
Image 2
Cisco Systems OL-24582-01 appendix Cable Specifications