Dell U2410 Monitor Specifications, Power Management Modes, Pin Assignments, VGA Connector, Sync

3DisplayPort Connector

4HDMI Connector

5DVI Connector-1

6DVI Connector-2

7VGA Connector

8Composite Video Connector

9Component Video Connectors

10Audio Out (Support two channel output )

11USB Upstream Port

12USB Downstream Port

13

Stand Lock （Use a M3x14 threaded screw to lock stand, screw not provided）

Monitor Specifications

The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.

Power Management Modes

If you have VESA's DPMS compliance display card or software installed in your computer, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power-saving feature:

VESA Modes	Horizontal
	Sync
Normal operation (with	Active
max luminance, Dell
Soundbar and USB
active)
Normal operation	Active
Active-off mode	Inactive
Switch off	-

Vertical Sync	Video
Active	Active
Active	Active
Inactive	Blanked
-	-

Power	Power Consumption
Indicator
Blue	132 W (Maximum)
Blue	75 W (Typical)
Amber	Less than 1 W
Off	Less than 1 W

Activate the computer and wake up the monitor to gain access to the OSD.

NOTE: This monitor is TCO' 03 power management compatible.

NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the power cable from the monitor.

Pin Assignments

VGA Connector

Pin Number

1

2

15-pin Side of the Connected Signal Cable

Video-Red

Video-Green

3

Video-Blue

4

GND

5

Self-test

6

GND-R