Dell U2410, 320-8277 manual Back Display Settings Wide Mode Horizontal Position Vertical Position

Back

Display Settings

Wide Mode

Horizontal Position

Vertical Position

Sharpness

Noise Reduction

Zoom

Pixel Clock

Phase

Dynamic Contrast

Display Info

Reset Display Settings

Back

PIP Settings

Touch to go back to the main menu.

Use the Display Settings to adjust image.

Adjusts the image ratio as 1:1, Aspect or full screen.

NOTE: Wide Mode adjustment is not required at optimal preset resolution 1920 x 1200.

Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).

Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).

This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100' .

Improve the motion picture quality by reducing noise on image edge.

Use the Zoom function to zoom in to specific area of interest.

Using the and keys to zoom in and out.

The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.

Use the and buttons to adjust for best image quality.

If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and th

NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.

Allows you to increase the level of contrast to provide sharper and more detailed image quality.

Displays the monitor's current settings.

Select this option to restore default display settings.

Touch to go back to the main menu.

This function brings up a window displaying image from another input source.

PIP/PBP submenu when PIP/PBP OFF (main source is VGA/DVI-D input) PIP/