Chapter 18 Configuring SGM Security
Configuring SGM
If you have enabled this function and you want to disable it (that is, prevent SGM from forcing users to change passwords), enter the following command:
# ./sgm passwordage clear
Note If sgm authtype is set to solaris, you cannot use the sgm passwordage
command. Instead, you must manage passwords on the external authentication servers.
Step 7 (Optional) You can configure SGM to disconnect an SGM or GTT client automatically after a specified number of minutes of inactivity. To do so, enter the following command:
#./sgm clitimeout number-of-minutes
where
The valid range is 1 minute to an unlimited number of minutes. There is no default value.
This function is disabled by default. If you do not specify the sgm clitimeout command, clients are never disconnected as a result of inactivity.
If you have enabled this function and you want to disable it (that is, never disconnect a client as a result of inactivity), enter the following command:
# ./sgm clitimeout clear
|
| Cisco Signaling Gateway Manager User Guide |
|
|
|
|
| ||
|
|
|
| |
|
|
|