Chapter 6 Desktop Info Servers
Installing a Dual Server Desktop Architecture
Table 6-1 DSD Configuration Prompts (continued)
Prompt | Response |
|
|
Do you want to create a Desktop Info Server | Do one of the following: |
on the current host? (y/n)? [y] | • To accept the default setting (the Desktop |
| |
| Info Server run on the current host), press |
| Return. |
| • If the Info Server installed on the will not be |
| the Master Info Server in the DSD |
| configuration, enter n. |
| Note If you have enabled SSL communication |
| on the host, you must create the Desktop |
| Info Server on the current host. |
| If you press Return, the following message |
| appears: |
| The Info Server INFO_SERVER_NAME has been |
| configured to be part of a DSD |
| architecture. |
|
|
INFO: The Info Server name must be a single | Do one of the following: |
word, no more than 11 characters long. It | • To accept the default name for the Desktop |
must be alphanumeric and start with a | |
letter | Info Server (DESKTOP), press Return. |
Enter the Desktop Info Server name | • To specify another name, enter the name. |
[DESKTOP]: |
|
|
|
Cisco Info Center Installation and Configuration Guide, 3.6.1
| ||
|