Chapter 6 Desktop Info Servers
Installing a Dual Server Desktop Architecture
Table
Prompt | Response |
|
|
INFO: The Info Server name must be a single | Do one of the following: |
word, no more than 11 characters long. It | • To accept the default name for the Desktop |
must be alphanumeric and start with a | |
letter. | Info Server (DESKTOP), press Return. |
Enter the Desktop Info Server name | • To specify another name, enter the name. |
| |
[DESKTOP]: |
|
|
|
Do you want to configure the Desktop Info | Enter y to specify SSL configuration for the |
Server for SSL? (y/n)? [n] y | Desktop Info Server. |
|
|
Enter the port number for the Desktop Info | Do one of the following: |
Server - DESKTOP - SSL [4401]: | • To accept the default port number (4401), |
| |
| press Return. |
| • To specify another port number, enter the port |
| number. |
| The following messages appear: |
| INFO: Creating Desktop Info Server |
| <DESKTOP_SERVER_NAME>... |
| INFO: Adding entry to omni.dat for |
| <DESKTOP_SERVER_NAME> |
| Generating SSL Certificates for the |
| server: <DESKTOP_SERVER_NAME> |
| This process takes at least 4 to 6 |
| minutes |
| Status can be checked at |
| /opt/Omnibus/utils/install/SSL/ssl.log |
|
|
Enter the SSL Key Protecting Password: | Enter an SSL Key Protection Password. |
| The following messages appear: |
| Please wait.... |
| <DESKTOP_SERVER_NAME> has been configured |
| to be part of a DSD architecture. |
|
|
Cisco Info Center Installation and Configuration Guide, 3.6.1
|
| ||
|
|
