HP Clustered Gateway Device Management Software Mxinit manage Matrix Server processes, Uusername

Chapter 1: Matrix Server Commands 13

-i<IP address of remote controller>

Specify the IP address of the remote controller.

-u<username>

Specify the username needed to access the remote controller.

-p<password>

Specify the password needed to access the remote controller.

mxinit – manage Matrix Server processes

Synopsis

/opt/polyserve/bin/mxinit [-s,--start][-x,--stop][-H,--hard][-g,--status][-L,--load-mod][-U,--unload-mod]

[-f file, --alt-config-file file] [-m,--monitor]

[-M,--no-monitor][--hba-status][--status][--version]

[-v,--verbose][-h,-?,--help]

Description

The mxinit utility is started automatically as a daemon on each server and monitors all Matrix Server processes running there. (You can start another instance of mxinit to perform other tasks provided by the utility.)

If a Matrix Server process dies unexpectedly on a server, mxinit will restart it if possible. However, certain process failures may force a restart of that particular server.

When you invoke mxinit to start Matrix Server, by default it continues running and monitors processes. If you do not want mxinit to monitor processes, invoke it with the -M(or --no-monitor) option. It will then exit after it completes the options you specified.

Copyright © 1999-2006 PolyServe, Inc. All rights reserved.