HP Clustered Gateway Device Management Software manual Rawstat interval count

Chapter 1: Matrix Server Commands 26

processing. Numbers are the raw counter values, not computed per sample. The syntax for the command is:

rawstat [interval [count]]

interval is the number of seconds between samplings. The default is one second. count is the number of samples to make; the default is to sample indefinitely.

The output consists of ASCII text delimited by carets. The fields are:

1.PSD device name

2.Sample number

3.Sampling interval

4.Number of targets

5.Current active target

6.Number of I/O sizes

7.First I/O size (power of 2)

8.Number of I/Os queued (includes raw)

9.Number of raw I/Os queued

10.Number of MP failovers

11.Number of MP fatal errors

12... Per-target I/O statistics in tuples, or groups of two numbers. (The number of targets is indicated in field 4.) Each tuple consists of the following fields for each target:

•SCSI I/Os queued

•Transient failures

Note that the “SCSI I/Os queued” numbers are for the underlying disk, not the partition. PSD devices that share the same underlying disk will share the same numbers here.

Copyright © 1999-2006 PolyServe, Inc. All rights reserved.