Chapter 2: mx Commands

59

mx application – manage applications

Use the following commands to manage Matrix Server applications:

Rename an application:

mx application rename <current_name> <new_name>

Enable an application:

mx application enable <application_name> <server>

Disable an application:

mx application disable <application_name> <server>

Show status for an application:

mx application status [--severity OKWARNINGERROR] [<application> ...]

mx device – device monitor commands

Use the following commands to configure device monitors or to display their status.

Add a device monitor:

mx device add --servers <server1>,<server2>,...

[optional-arguments] <devicename> ...

--serversspecifies the server or servers that use the monitored device. The <devicename> can include up to 32 characters.

The arguments are:

[--application <application>]

The application associated with this device monitor.

[--timeout <seconds>]

The maximum amount of time to wait for a probe of the device to complete. For DISK and SHARED_FILESYSTEM device monitors, the default is five seconds. For CUSTOM device monitors, the default is 60 seconds.

[--frequency <seconds>]

The interval at which the monitor probes the device. For DISK and SHARED_FILESYSTEM device monitors, the default is 30 seconds. For CUSTOM device monitors, the default is 60 seconds.

Copyright © 1999-2006 PolyServe, Inc. All rights reserved.

Page 64
Image 64
HP Clustered Gateway Device Management Software Mx application manage applications, Mx device device monitor commands