HP Clustered Gateway Device Management Software manual Mpdump Save membership partition data

Chapter 1: Matrix Server Commands 6

The following command shows the syntax for the quotas parameters:

mkpsfs -o enable-quotas,userdefault=#[TGMK],groupdefault=#[TGMK]dev

If no -ooptions are specified, the filesystem will be created with Full Zone Bit Maps (FZBM) and without quotas.

mpdump – Save membership partition data

Synopsis

/opt/polyserve/lib/mpdump mpdump [-v]-F

mpdump [-v]-f <outputfile>

Description

The mpdump utility backs up the membership partition data to a file and/or the screen. When the utility is invoked with no options, the data is output to the screen.

The options are:

-F

Send the data to the default membership partition backup file, /var/opt/polyserve/run/MP.backup. This file can subsequently be used as input to the mpimport utility if needed. If there is an existing backup file, it will be saved as /var/opt/polyserve/run/MP.backup.prev.

-f<outputfile>

Send the data to the specified output file.

-V

Output the data to both the screen and the file.

mpimport – Restore membership partition data

Synopsis

/opt/polyserve/lib/mpimport <options>

Description

The mpimport utility can be used to existing SCL database. (Either -For

import disks or dynamic volumes into an -fis required to import a dynamic

Copyright © 1999-2006 PolyServe, Inc. All rights reserved.