HP Clustered Gateway Device Management Software Version, Monitor, No-monitor, Hba-status, Status

Chapter 1: Matrix Server Commands 15

--version

Display the version of Matrix Server.

-m,--monitor

Explicitly tell mxinit to monitor processes. This is the default when mxinit is invoked to start Matrix Server.

-M,--no-monitor

Explicitly tell mxinit not to monitor processes.

--hba-status

Display the state of the FibreChannel host bus adapter drivers.

--status

Display the status of Matrix Server processes and modules. Following is an example.

$ status

PolyServe Matrix Server Status:

Name	pid / status
mxinit	15930	mxinit: Monitoring MxS processes
mxlog	Loaded
grpcommd	15885
mxlogd	15887
pswebsvr	15890
clusterpulse	15892
panpulse	15912
psd_devfs	Loaded
psfs	Loaded
dlm	15913
sanpulse	15917

FibreChannel adapter module status:

qla2300 - QLogic 2300 FibreChannel Adapter, is Loaded

The PID is displayed for running processes; “Stopped” is displayed for processes that are not running. For modules, the status specifies whether the module is loaded. The “FibreChannel adapter module status” section displays status for the FibreChannel adapter modules installed on the system.

Copyright © 1999-2006 PolyServe, Inc. All rights reserved.