HP Clustered Gateway Device Management Software manual Feature Feature, Verbose,-v

Chapter 1: Matrix Server Commands 40

device is a psd or psv device and is specified as follows:

•For a psd device partition, the device is specified as

/dev/psd/psdXXXpYY, where XXX is the drive number and YY is the partition number. For example, /dev/psd/psd6p4 specifies partition 4 on disk psd6.

•For a non-partitioned psd device, the device is specified as /dev/psd/psdXXX, where XXX is the drive number. For example, /dev/psd/psd5.

•For a psv device, the device is specified as /dev/psv/psvXXX, where XXX is the volume number. For example, /dev/psv/psv1.

You do not need to specify the full path name. A name such as psd6p4 or psv1 will work.

The options are:

--feature <FEATURE>

Report whether the specified feature is enabled in the filesystem indicated by <device>. The command can test for the following features:

FZBM – the Full Zone Bit Map feature

QUOTA – the disk quota feature

If the feature is enabled, the name of the feature will be displayed. If the feature is not enabled, “<FEATURE>=0” will be reported. (You can use the --helpoption to list the features that can be tested.)

This option also reports the exit value:

–0 – enabled

–1 – not enabled

–2 – could not open or read disk

–3 – a bad argument was specified

--version

Display the version of the on-disk filesystem format.

--verbose,-v

Enable verbose messages.

Copyright © 1999-2006 PolyServe, Inc. All rights reserved.