HP Clustered Gateway Device Management Software manual Spdebug obtain SanPulse debug information

Chapter 1: Matrix Server Commands 52

spdebug – obtain SanPulse debug information

Synopsis

/opt/polyserve/tools/spdebug

Description

This command should be run only at the request of PolyServe personnel.

spstat – show matrix state information

Synopsis

/opt/polyserve/tools/spstat

Description

This command should be run only at the request of PolyServe personnel.

warnquota – warn users of quota limits

Synopsis/

/opt/polyserve/sbin/warnquota

Description

This command is based on the Linux warnquota command but has been modified to work with PSFS filesystems as well as the standard Linux filesystem types. The command is provided on the Matrix Server quota tools RPM. There are no changes to the syntax or operation of the command. See the Linux warnquota man page for details about using the command.

wmtest – test server-based fencing

Synopsis

/opt/polyserve/tools/wmtest <brand> <hostname> <blade> <command> <user> <pass> [verbose]

Description

This command can be run to verify that the server management interface works with Matrix Server server-based fencing. The command tests only the fencing agents.

Copyright © 1999-2006 PolyServe, Inc. All rights reserved.