HP Clustered Gateway Device Management Software PSANcfg manage ports, community string, Uswitch

Chapter 1: Matrix Server Commands 34

PSANcfg – manage ports, community string

Synopsis

/opt/polyserve/sbin/PSANcfg [-hu][-[lL]<Port WWN>] [switch ...]

Description

The PSANcfg command can be used to add or remove local HBA port information in the Matrix Server configuration and to unfence ports on FibreChannel switches.

The options are:

-l,-L

The -lcommand adds the specified HBA port to the list of local ports; -Lremoves the specified port. The mxsanconf command invokes PSANcfg with these options; they should not be run directly.

-uswitch ...

Unfence all local ports on the specified FC switches.

-h

Print a usage message.

PSANinfo – show FC logins, Naming Database

Synopsis

/opt/polyserve/sbin/PSANinfo [-n][[-s][-u]]<switchname>

Description

The PSANinfo command can be used to print the Naming Database or to get a snapshot of logins for a particular FibreChannel switch.

The options are:

-n

Print the contents of the Naming Database.

-s

Wait <s> seconds between probes of the FC switch.

-u

Wait <u> microseconds between probes of the FC switch.

Copyright © 1999-2006 PolyServe, Inc. All rights reserved.