HP Clustered Gateway Device Management Software manual Mxsetsecret set the network secret password

Chapter 1: Matrix Server Commands 33

mxsetsecret – set the network secret password

Synopsis

/opt/polyserve/bin/mxsetsecret -f [--filename] <filename> <secret>

Description

This command is typically run by mxconfig and should be run manually only at the request of PolyServe personnel.

pmxs – start or stop Matrix Server or view status

Synopsis

/etc/init.d/pmxs start /etc/init.d/pmxs stop /etc/init.d/pmxs restart /etc/init.d/pmxs status

Description

Matrix Server runs on each server in the matrix. When a server is booted to run-levels 3 or 5, Matrix Server is started automatically by the script /etc/init.d/pmxs. If you need to start, stop, or restart Matrix Server on a particular server, invoke the pmxs script with the appropriate argument.

The pmxs script calls the mxinit utility. For a start operation, mxinit starts the Matrix Server processes in the correct order and loads the kernel modules. For a stop operation, it stops the Matrix Server processes, unloads the kernel modules, and performs cleanup tasks.

The status option displays the same information as the mxinit --statuscommand. You do not need to be user root to run the command.

Copyright © 1999-2006 PolyServe, Inc. All rights reserved.