HP Clustered Gateway Device Management Software manual Do not validate the export records

Chapter 2: mx Commands	66
[--startScript <script>]

A script that runs when the NFS service become active on a server. The script pathname can be up to 512 characters long.

[--stopScript <script>]

A script that runs on all other servers configured for the high-availability monitor to ensure that the NFS service is not active on those servers. The script pathname can be up to 512 characters long.

[--startTimeout <seconds>]

The amount of time to wait for the Start script to complete.

[--stopTimeout <seconds>]

The amount of time to wait for the Stop script to complete.

[--scriptSeverity considerignore]

Whether Matrix Server should take monitor events (such as a failure or timeout of a Start or Stop script) into consideration when it makes failover decisions. The default is consider.

[--novalidate]

Do not validate the export records.

Update an Export Group:

mx exportgroup update [--exports<exports_file>] [other-arguments]--vnfs<vnfs1>,<vnfs2>,... <exportgroup_name>

The arguments are the same as the exportgroup add command.

View Export Groups:
mx exportgroup status [--up--down][--enabled--disabled]	]
[--primary--backup][--active--inactive] [<exportgroup_name> ...
View the Performance Dashboard for an Export Group:
mx exportgroup dashboard [--server ALL_SERVERS
<server_name_or_IP>] [--datasets<number of data sets>
UNLIMITED] [--noHeaders][--csv]<exportgroup_name>
The arguments are:
--serversALL_SERVERS <server_name_or_IP>
The server to be monitored. The default is all servers.

Copyright © 1999-2006 PolyServe, Inc. All rights reserved.