HP Clustered Gateway Device Management Software manual Mx server server commands

Chapter 2: mx Commands 79

Search the password file or database for user information:

mx quota searchuser [search-arguments]

The search arguments are:

[--id<ID1,ID2,ID4-8...>]

A user ID or range of IDs.

[--name<name1,name2,...>]

One or more user or group names. You can also enter a regular expression.

[--regex]

The value specified for --nameis a regular expression.

[--memberOf]

The value specified for --nameis a group name.

Search the password file or database for group information.

mx quota searchgroup [search-arguments]

The search arguments are the same as mx quota showgroup, with the exception that the --memberofargument is not used.

mx server – server commands

Use the following commands to configure servers or to display their status.

Add a server to the matrix:

mx server add [--serverSeverity autorecovernoautorecover]

<server> ...

The --serverSeverityargument specifies whether virtual hosts will automatically fail back to the original server after that server has recovered from a complete system outage. The default is autorecover.

Update one or more servers in a matrix:

mx server update [--serverSeverity autorecover

noautorecover] <server> ...

Delete one or more servers from a matrix:

mx server delete <server> ...

Disable one or more servers:

mx server disable <server> ...

Copyright © 1999-2006 PolyServe, Inc. All rights reserved.