![](/images/new-backgrounds/1310108/31010823x1.webp)
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Determining the MAC Address of a Cisco Unified IP Phone
Determining the MAC Address of a Cisco Unified IP Phone
There are several procedures that require you to determine and enter the MAC address of a Cisco Unified IP Phone. These procedures include adding phones the the Cisco Unified CallManager database using Cisco Unified CallManager Administration or using BAT.
Table
Table
Cisco Unified |
|
|
IP Phone | Method | Reference |
|
|
|
7905G and | Choose Menu > Settings > | See Chapter 4, “Configuring |
7912G | Network Configuration and | Settings on the Cisco |
| look at the MAC Address field | Unified IP Phone.” |
|
|
|
7905G and | Display the Phone | See Appendix A, “Reference |
7912G | Configuration Web Page and | List of Parameters.” |
| look for the MAC address; |
|
| enter: |
|
| http://PHONE_IPAddress> |
|
|
|
|
Adding Phones to the Cisco Unified CallManager Database
Before installing the Cisco Unified IP phone, you must choose a method for adding phones to the Cisco Unified CallManager database. The following sections describe these methods:
•Adding Phones with
•Adding Phones with Cisco Unified CallManager Administration, page
•Adding Phones with BAT, page
|
| Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones | |
|
| ||
|
| ||
|
|