Cisco Systems OL-8155-01 manual 11for an example of the window

Chapter 2 Installing the Cisco IPICS Server Software

Preparing to Use Cisco IPICS

c.Choose System Tools > Network Device Control. See Figure 2-10for an example of the menu.

Figure 2-36 Using the Red Hat Menu

The Network Device Control window displays at least one active port. See

Figure 2-11for an example of the window.

Note Your server may have more than one Ethernet port. If so, choose eth0.

Figure 2-37 Network Device Control Window

	Cisco IPICS Server Installation Guide
OL-8155-01		2-51