Cisco Systems ONS 15600 Bridge and Roll, Alarms, CSCdy54737, CSCdy14265, CSCsd52527, Line, Path

Caveats

CSCdy54737

The following PM parameters can not be retrieved through SNMP.

•Line:

–FC-L

•Path:

–FC-P

–PPJC-Pdet

–NPJC-Pdet

–PPJC-Pgen

–NPJC-Pgen

•Protection groups:

–PSC

–PSD

•Far End counts for line and path

•1-Day PM counts

To retrieve these counts, use CTC. SNMP support for these parameters may be considered for a future release.

Bridge and Roll

CSCdy14265

The manual bridge and roll feature allows you to perform the END command once the roll operation transitions from a ROLL PENDING to ROLL condition, even if the roll to port has an invalid signal. To avoid traffic impact, ensure that the roll-to line is alarm-free. If an alarm exists, you can choose to do nothing and wait for the alarm to clear, to delete the roll, or to proceed in spite of the alarm. This issue will not be resolved.

Alarms

CSCsd52527

The AS-MT and the AS-CMD alarms do not show up on the alarm profile in CTC, so you cannot change the severity of these alarm using CTC. This issue will be resolved in a future release.

Release Notes for Cisco ONS 15600 Release 8.0

OL-10906-01 7