Cisco Systems ONS 15600 manual Changes to the Release Notes, Caveats, Hardware, ONS-SE-2G-xx.x

Changes to the Release Notes

Changes to the Release Notes

This section documents supplemental changes that have been added to the Release Notes for Cisco ONS 15600 Release 8.0 since the production of the Cisco ONS 15600 System Software CD for Release 8.0.

Following change has been made to the release notes for Release 8.0.

OC192/STM64 4 Port ITU C-Band Card is not supported in this release.

Caveats

Review the notes listed below before deploying the ONS 15600. Caveats with tracking numbers are known system limitations that are scheduled to be addressed in a subsequent release. Caveats without tracking numbers are provided to point out procedural or situational considerations when deploying the product.

Hardware

ONS-SE-2G-xx.x

The ONS-SE-2G-xx.x complies with performance criteria for all intra-facility fiber cables and connectors per Telcordia GR-326-CORE, Issue 3 Sept. 1999. Cisco recommends the following approved suppliers for intrafacility fiber cables to use with this product:

•Volex

•Fitel

•Sumitomo

•Fujikura

•Tyco

Maintenance and Administration

Caution VxWorks is intended for qualified Cisco personnel only. Customer use of VxWorks is not recommended, nor is it supported by Cisco's Technical Assistance Center. Inappropriate use of VxWorks commands can have a negative and service affecting impact on your network. Please consult the troubleshooting guide for your release and platform for appropriate troubleshooting procedures. To exit without logging in, enter a Control-D (hold down the Control and D keys at the same time) at the Username prompt. To exit after logging in, type “logout” at the VxWorks shell prompt.

Release Notes for Cisco ONS 15600 Release 8.0

2 OL-10906-01