®
A Division of Cisco Systems, Inc.
1 Connect the Router
2 |
| Configure the Router |
Package Contents
• 10/100
• User Guide
• AC Power Cable
• Rack Mounting Kit
• Quick Installation
• Registration Card
10/100 16-Port
|
|
|
|
| VPN Router | |||
|
|
| WIRED |
| Quick Installation | |||
| Model No. RV016 |
|
|
|
| |||
|
|
|
|
| ||||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
A Before you begin, make sure |
| |
that all of your hardware is |
| |
powered off, including the |
| |
Router, PCs, hubs, switches, |
| |
and cable or DSL modem. |
| |
B Connect one end of an Ether- |
| |
net network cable to one of |
| |
the numbered ports on the |
| |
front of the Router (see Figure |
| |
B). Connect the other end to |
| |
an Ethernet port on a network |
| |
device, e.g., a PC, print server, |
| |
hub, or switch. | B | |
Repeat this step to connect | ||
| ||
more PCs or other network |
| |
devices to the Router. |
| |
C Connect your cable or DSL |
| |
modem’s Ethernet cable to |
| |
the Router’s Internet port. If |
| |
using multiple Internet ports, |
| |
connect a cable to each Inter- |
| |
net port you’d like to use, and |
| |
connect the other end to your | C | |
modem. See Figure C. | ||
| ||
D Power on the cable or DSL |
| |
modem and the other network |
| |
device if using one. |
|
E Connect the included AC power cable to the Router’s Power port on the back of the Router, as shown in Figure E, and then plug the other end of the power cable into an elec- trical outlet.
The System LED on the front panel will light up as soon as the power adapter is con- nected properly.
E
Configuring the Router requires the setup instructions provided by your Internet Service Provider (ISP). If you do not have this information, con- tact your ISP before proceeding.
Your ISP determines how your PC is set up for Internet access. Because you are now using the Router to share Internet access among sev- eral computers, you will use the setup information to configure the Router instead of your PC.
A Open your PC’s web browser. Enter http://192.168.1.1 (the Router’s default local IP address) in the web browser’s Address field and press the Enter key.
B Enter a User Name and Pass- word on the screen that appears. Enter admin (the default) in the the User Name and Password fields. Then, click the OK button.
C The Router’s
NOTE:: Make sure your PC’s Ethernet adapter is set to obtain an IP address automatically. For more information, refer to Win- dows Help.
A
B
C
