Cisco Systems SD2008 quick start Product Overview, Typical Installation Scenario, Front Panel

Quick Start Guide

Cisco Small Business

Model SD2008

8-Port 10/100/1000 Gigabit Switch

Package Contents

•SD2008 Gigabit Switch

•Power Adapter

•Quick Start Guide

1 Product Overview

Thank you for choosing the Cisco 8-Port 10/100/1000 Gigabit Switch. The Switch provides non-blocking, wire speed switching for your 10, 100, and 1000 Mbps network clients.

Front Panel

The Port Status and System Status LEDs are located on the front panel of the Switch.

System—(Green) This LED lights up and remains lit when the Switch is powered on.

Ports 1-8—(Green) Each LED lights up when a connection is made through its corresponding port. It flashes when the corresponding port is active.

Back Panel

The Ethernet network ports are located on the back panel of the Switch. All ports are auto-negotiating and have automatic MDI/MDI-X crossover detection.

Side Panel

The power port and security slot are located on the side panels of the Switch.

The power port is where you will connect the power adapter.

The security slot is where you can attach a lock to protect the Switch from theft.

Placement Options

Set the Switch on its four rubber feet, or mount the Switch on a wall.

The Switch offers two wall-mount slots, which are the two crisscross slots on the bottom panel. The measurement between the two slots is 2.52 inches (64 mm).

To use the wall-mount option, follow these instructions:

STEP 1 Attach two screws to the wall, 2.52 inches (64 mm) apart, so that the

Switch’s wall-mount slots can line up with the two screws.

STEP 2 Maneuver the Switch to insert the screws into the two slots.

2 Typical Installation Scenario

The application diagram shown here is an example of a typical network configuration.

When you connect your network devices, make sure you don’t exceed the maximum cabling distances, which are listed in the following table:

From	To	Maximum Distance
Switch	Switch	100 meters (328 feet)
Switch	Computer	100 meters (328 feet)

NOTE Use Category 5e Ethernet network cables for your Gigabit connections.

1-8—These ports connect the Switch to network devices, such as computers.