Cisco Systems SFS 7008P - page 16

16
Cisco SFS 7008P InfiniBand Server Switch Installation and Configuration Note
78-17434-01 Rev. A0
Installing the Cisco SFS 7008P Switch into a Rack
Figure 15 Driver Installation Notice
Step 8 Important: Ignore the Found New Hardware Wizard (see Figure16) when it appears because it will
continue without user intervention. This window appears three times (twice for the IPoIB and once for
SRP).
Figure 16 Ignore the Found New Hardware Wizard Windows
Step 9 Click Finish.
Step 10 Reboot the server.
a. In Windows, click Start > Shutdown.
You see the screen in Figure17.
b. Select Restart from the drop-down menu(see Figure 17).
c. Optionally, enter a reason for the system reboot in the Comment field (see Figure17), if your server
requires it.
d. Click OK.
The system reboots and new driver installation is complete.