Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive San Jose, CA
USA http://www.cisco.com Tel: 408
800
Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0705R)
© 2008 Cisco Systems, Inc. All rights reserved.
Printed in the USA on recycled paper containing 10% postconsumer waste.
3 Installation
Perform the steps in this section to install the hardware.
STEP 1 Make sure all the devices you will connect to the Switch are powered off.
STEP 2 Connect a Category 5 Ethernet network cable to one of the numbered ports on the Switch. Connect the other end to a PC or other network device.
STEP 3 Repeat step 2 to connect additional devices.
STEP 4 If you are using a
NOTE The
STEP 5 Connect the supplied power cord to the Switch’s power port, and plug the other end into an electrical outlet. When connecting power, always use a surge protector.
STEP 6 Power on the devices connected to the Switch. Each active port’s corresponding LED will light up on the Switch.
Congratulations! The installation of the 10/100/1000 Gigabit Switch is complete!
4 Specifications
The following table lists the specifications for the SR2016 10/100/1000 Gigabit Switch.
Model | SR2016 |
|
|
Standards | IEEE 802.3, 802.3u, 802.3x, |
| 802.3ab |
|
|
Ports | 16 10/100/1000 Mbps |
| ports |
|
|
Cabling Type | Cat5 Ethernet |
|
|
LEDs | System, 1 through 16 |
|
|
Dimensions | WxHxD |
| 10.98” x 1.75” x 9.45” |
| 279 mm x 44.5 mm x 240 mm |
|
|
Unit Weight | 4.75 lbs (2.155 kg) |
|
|
Power | |
|
|
Certification | FCC Class A, CE |
|
|
Operating Temperature | 32 to 104ºF (0 to 40ºC) |
|
|
Storage Temperature | |
|
|
Operating Humidy | 20% to 95%, noncondensing |
|
|
Storage Humidy | 5% to 95%, noncondensing |
|
|
The following table lists the specifications for the SR2024C 10/100/1000 Gigabit Switch.
Model | SR2024C |
|
|
Standards | IEEE 802.3, 802.3u, 802.3x, |
| 802.3ab |
|
|
Ports | 24 10/100/1000 Mbps |
| ports + 2 |
|
|
Cabling Type | Cat5 Ethernet |
|
|
LEDs | System, 1 through 24 |
|
|
Dimensions | WxHxD |
| 17.00” x 1.75” x 13.74” |
| 432 mm x 44.5 mm x 349 mm |
|
|
Unit Weight | 7.98 lbs (3.621 kg) |
|
|
Power | |
| 50~60HZ |
|
|
Certification | FCC Class A, CE |
|
|
Operating Temperature | 32 to 104ºF (0 to 40ºC) |
|
|
Storage Temperature | |
|
|
Operating Humidity | 10% to 90%, noncondensing |
|
|
Storage Humidity | 10% to 95%, noncondensing |
|
|
5 Where to Go From Here
Resource | Location |
|
|
Customer Support | www.cisco.com/go/smallbiz |
|
|
End User License Agreement | www.cisco.com/go/smallbiz |
|
|
Regulatory Compliance and Safety | www.cisco.com/go/smallbiz |
Information |
|
|
|
Warranty Information | www.cisco.com/go/smallbiz |
|
|
Cisco Partner Central site for Small | www.cisco.com/web/partners/sell/ |
Business | smb/ |
|
|
