Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive San Jose, CA
USA http://www.cisco.com Tel: 408
800
Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0705R)
© 2008 Cisco Systems, Inc. All rights reserved.
Printed in the USA on recycled paper containing 10% postconsumer waste.
2 Typical Installation Scenario
The application diagram shown is an example of a typical network configuration. This diagram shows the front panel of the SR216 and is used only as a reference.
When you connect your network devices, make sure you don’t exceed the maximum cabling distances, listed in the following table.
From | To | Maximum Distance |
|
|
|
Switch | Switch | 100 meters (328 feet) |
|
|
|
Switch | Computer | 100 meters (328 feet) |
|
|
|
NOTE Use Category 5e Ethernet network cables for your Gigabit connections.
3 Installation
Perform the steps in this section to install the hardware.
STEP 1 Make sure all the devices you will connect to the Switch are powered off.
STEP 2 Connect a Category 5 Ethernet network cable to one of the numbered ports on the Switch. Connect the other end to a PC or other network device.
STEP 3 Repeat step 2 to connect additional devices.
STEP 4 Connect the supplied power cord to the Switch’s power port, and plug the other end into an electrical outlet. When connecting power, always use a surge protector.
STEP 5 Power on the devices connected to the Switch. Each active port’s corresponding LED will light up on the Switch.
Congratulations! The installation of the 10/100 Switch is complete!
4 Specifications
The following table lists the specifications for the SR216 and SR224 10/100 Switches.
Model | SR216 or SR224 |
|
|
Standards | IEEE 802.3, 802.3u |
|
|
Ports | SR216: 16 10/100 Mbps |
| SR224: 24 10/100 Mbps |
|
|
Cabling Type | Cat5 Ethernet |
|
|
LEDs | SR216: System, 1 through 16 |
| SR224: System, 1 through 24 |
|
|
Security Feature | Security Slot |
|
|
Dimensions | WxHxD |
| 11” x 1.75” x 9.45” |
| 279 mm x 45 mm x 240 mm |
|
|
Unit Weight | 0.94 lbs (0.425 kg) |
|
|
Power | SR216: 3.3V/3A |
| SR224: 3.3V/5A |
|
|
Certification | FCC Class B, CE |
|
|
Operating Temperature | 32 to 104ºF (0 to 40ºC) |
|
|
Storage Temperature | |
|
|
Operating Humidy | 20% to 95%, noncondensing |
|
|
Storage Humidy | 5% to 90%, noncondensing |
|
|
5 Where to Go From Here
Resource | Location |
|
|
Customer Support | www.cisco.com/go/smallbiz |
|
|
End User License Agreement | www.cisco.com/go/smallbiz |
|
|
Regulatory Compliance and Safety | www.cisco.com/go/smallbiz |
Information |
|
|
|
Warranty Information | www.cisco.com/go/smallbiz |
|
|
Cisco Partner Central site for Small | www.cisco.com/web/partners/sell/ |
Business | smb/ |
|
|
