Cisco Systems UCSFI6248E1628P manual Product Specifications, Transceivers, Cisco SFP Description

Feature

Lossless fabric

Priority flow control (PFC)

Systemwide bandwidth management

Cisco Data Center VM-FEX technology

Rear ports

Redundant hot- swappable fans and power supplies

Front-to-back cooling

SFP+ ports

SFP-compatible ports

Port-based licensing options

Benefit

●Provides a reliable, robust foundation for unifying LAN and SAN traffic on a single transport

●Simplifies management of multiple traffic flows over a single network link

●Supports different classes of service, helping enable both lossless and classic Ethernet on the same fabric

●Helps enable consistent and coherent quality of service (QoS) throughout the system

●Helps enable a consistent operational model between virtual and physical environments

●Provides the same level of network visibility for virtualized and nonvirtualized environments

●Improves diagnostic and troubleshooting capabilities in a virtual environment

●Simplifies network and security policy enforcement when migrating virtual machines from one host to another

●Helps keep cable lengths short and efficient

●Helps enable high availability in multiple configurations

●Increases serviceability

●Provides uninterrupted service during maintenance

●Supports efficient data center hot- and cold-aisle designs

●Increases flexibility with a range of interconnect solutions, including copper Twinax cable for short runs and fiber for long runs

●Consumes less power per port than traditional solutions

●Helps enable cost-effective connections on fabric extenders with Cisco Fabric Extender Transceiver (FET) optics

●Allows all fixed and modular expansion ports to be configured to operate in 1 Gigabit Ethernet mode with the transceiver options specified for use with SFP-compatible ports in Table 3

●Helps enable a pay-as-you-go model, allowing customers to add capacity as the networking needs of an individual system increase

Product Specifications

Transceivers

The Cisco UCS 6200 Series supports a wide variety of 10 Gigabit Ethernet connectivity options using Cisco 10GBASE SFP+ modules. In addition, all fixed and modular expansion ports on the Cisco UCS 6200 Series support 1 Gigabit Ethernet connectivity options using 1GBASE SFP modules. Alternatively, 2/4/8-Gbps Fibre Channel SFP+ and 1/2/4-Gbps Fibre Channel SFP interfaces are supported on all ports.

Table 3 lists the supported transceiver options.

	Table 3.	Cisco UCS 6200 Series Transceiver Support Matrix
	Cisco SFP		Description
	Cisco SFP-10G-SR		10GBASE-SR SFP+ module (multimode fiber [MMF])
	Cisco SFP-10G-LR		10GBASE-LR SFP+ module (single-mode fiber [SMF])
	Cisco SFP-H10GB-		10GBASE-CU SFP+ cable 1m (Twinax cable)
	CU1M
	Cisco SFP-H10GB-		10GBASE-CU SFP+ cable 3m (Twinax cable)
	CU3M
	Cisco SFP-H10GB-		10GBASE-CU SFP+ cable 5m (Twinax cable)
	CU5M
	SFP-H10GB-ACU7M		10GBASE-CU SFP+ cable 7m (Twinax cable)
	SFP-H10GB-ACU10M		10GBASE-CU SFP+ cable 10m (Twinax cable)
	Cisco FET-10G		10GBASE-FET SFP+ module (MMF)
	Cisco GLC-T		1000BASE-T SFP (for SFP-compatible ports only, as defined in Table 2)
	Cisco GLC-SX-MM		GE SFP, LC connector SX transceiver (MMF) (for SFP-compatible ports only, as defined in Table 2)
	Cisco GLC-LH-SM		GE SFP, LC connector LX/LH transceiver (SMF) (for SFP-compatible ports only, as defined in Table 2)
	Cisco SFP-GE-T		1000BASE-T SFP, extended temperature range (for SFP-compatible ports only, as defined in Table 2)
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.				Page 5 of 10