Support on IAD2430 Series, Network Interface | Cisco Systems WIC-1DSU-T1-V2

Support on IAD2430 Series

∙The IAD2431-8FXS, IAD2431-16FXS, IAD2432-24FXS, IAD2431-1T1E1 are supported on the following releases:

–12.3(7)T4

–12.3(8)T6

–12.3(11)T2

∙Network clock participate was added, and is available in releases:

–12.3(7)T6

–12.3(8)T6

–12.3(11)T2

∙Width: 3.1 in. (7.9 cm)

∙Height: 0.8 in. (2.1 cm)

∙Depth: 4.8 in. (12.2 cm)

∙Weight: 0.14 lb (62g)

∙Transmit bit rate: 1.544 Mbps +/- 50 bps

∙Receive bit rate: 1.544 Mbps +/- 100 bps

∙Line code: AMI, B8ZS

∙AMI ones density

–Forced/bit robbing (N X56)

–High-Level Data Link Control (HDLC) data inversion (N X64)

∙Framing format: D4 (SF) and ESF

∙Output level (LBO): 0, -7.5, or -15 dB

∙Input level: +1 dB0 to -24 dB0

∙Data rates

–N x 64 kbps (N = 1 through 24); nonchannelized

–N x 56 kbps (N = 1 through 24); nonchannelized

∙Interface connector: RJ-45

∙System timing: Network and internal

∙Loopbacks

–Network line loopback; user initiated

–Recessed push button for network line loopback; toggle on/off

–Network line loopback; telco initiated

–Network payload loopback

–Local date terminal equipment (DTE) loopback

–Remote line and payload loopback (codes: V.54 loop up, and loop down)

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.

Page 4 of 7