HOW TO MEASURE YOUR BLOOD PRESSURE
4.2 Pressurize the cuff
Pressurize the cuff by pumping bulb until you have a reading of approximately 30 to 40 mmHg higher than your regular systolic blood pressure.
When pressurization is completed, the automatic air release system will gradually reduce cuff pressure, and Measuring Mark " 
" will appear on the display indication that measurement is in progress.
(* Do not pump bulb while measuring.)
When a pulse is detected, a pressure reading will shift to the diastolic pressure display section. Once the pulse is detected, the " 
" mark will flash with each pulse beat.
When the diastolic pressure value is detected, the measurement is completed.
After completion of measurement, the mark "▼" appears.
HOW TO MEASURE YOUR BLOOD PRESSURE
4.3 Press the exhaust button
Press the exhaust button valve to completely release the air in the cuff.
Exhaust button
4.4 Power off
Press the "POWER" switch to turn off.
4.5 Subsequent measurement
For another measurement, just pressurize the cuff by pumping bulb.
The time between two such Measurements must be at least 3 minutes.
Automatic Power off Function
About 3 minutes after the last measurement was obtained, the power will be turned off, automatically.
English
- Eng 16 - | - Eng 17 - |
