Citizen CH-432B Measurements, Attaching of Arm Cuff and Posture During Measurement

MEASUREMENTS

1.Attaching of Arm Cuff and Posture During Measurement

Unfasten and open the cuff as shown in the figure.

Wind the arm cuff around the left upper arm tightly so that bottom edge of the cuff is positioned about 1 – 2cm above the elbow joint.

•When you will wind the cuff, please wind the cuff next to the skin of possible.

(If measurement is made by rolling the shirts or jacket up over the arm, this will constrict the upper arm and prevent accurate measurement.)

•Cuff tube should be placed on the inside of your arm as figure.

•Please make sure that the cuff is fastened tightly. Note that uneven cuff winding will prevent proper measure- ments.

- Eng 6 -