SP6567 16 Gallon Steel.qxd 8/15/07 1:32 PM Page 14

Maintenance (continued)

Cleaning A Wet Filter

After filter is removed, run water through the filter from a hose or spigot. Take care that water pressure from the hose is not strong enough to damage filter.

Installation

Refer to page 7 "Replacement Filter Assembly" Section of this manual.

Allow the filter to dry before reinstalling and storing the vac.

Cleaning and Disinfecting the Wet/Dry Vac

To keep your Wet/Dry Vac looking its best, clean the outside with a cloth dampened with warm water and mild soap.

To clean the drum:

1.Dump debris out.

2.Wash drum thoroughly with warm water and mild soap.

3.Wipe out with dry cloth.

Before prolonged storage or as needed (i.e.; waste water pick up) the drum should be disinfected.

To disinfect the drum:

1.Pour 1 gallon of water and 1 teaspoon chlorine bleach into the drum.

2.Let solution stand for 20 minutes, carefully swishing every few minutes, making sure to wet all inside surfaces of the drum.

3.Empty drum after 20 minutes. Rinse with water until bleach smell is gone. Allow drum to dry completely before sealing the motor on the drum.

Storage

Before storing your vac, the dust drum should be emptied and cleaned. The cord should be wrapped around the unit and the hose should be stored as described in this manual. Accessories should be kept in the same area as the vac so they can be readily available. The vac should be stored indoors.

Casters and Wheels

Should your cart squeak or become hard to roll, you should place two or three drops of general purpose oil on each wheel at the axle. If your casters are noisy, you may put a drop of oil on the roller shaft to make them quieter.

Frame and Handles

Your metal handle is painted to prevent rust, however, liquids and corrosive debris should be wiped off with a soft cloth should they come in contact with the handle.

!WARNING: To assure product SAFETY and RELIABILITY, repairs and adjustments should be performed by Authorized Service Centers, always using RIDGID replacement parts.

Wet Nozzle

To pick up liquids off a smooth surface, use the 2-1/2 inch wet nozzle accessory supplied with your wet/dry vac. To use this nozzle, simply attach the nozzle to the end of an extension wand.

Connect a second extension wand to the first, and connect the 2-1/2 inch x 7 foot hose to the extension wand.

Liquids may be picked up by dragging the nozzle across the surface. The squeegee will dry the surface as you vacuum.

If the rubber becomes worn, it may be flipped over for use on the opposite side or replaced. (Replacement service part #822256). To reverse or replace the squeegee:

14

Page 13 Page 15
Page 14
Image 14
RIDGID WD1950 Cleaning a Wet Filter, Installation, Cleaning and Disinfecting the Wet/Dry Vac, Storage, Casters and Wheels
Page 13 Page 15

WD1950 specifications

The RIDGID WD1950 is a powerful and versatile wet/dry vac that has garnered attention from both professionals and DIY enthusiasts alike. Designed for a variety of cleanup tasks, this vacuum combines performance with innovative features to make cleaning easier and more efficient.

One of the standout characteristics of the RIDGID WD1950 is its impressive 16-gallon capacity, which allows users to tackle large messes without the need for frequent emptying. This robust design makes it suitable for a variety of environments, from construction sites to home workshops. The vacuum is equipped with a potent 2.0 Peak HP motor, delivering a strong suction power that effectively handles a wide range of debris, from fine dust to heavy liquids.

Another key feature of the RIDGID WD1950 is its advanced filtration system. The vacuum utilizes a large, detachable filter that captures fine particles, ensuring that the air remains clean while you work. Designed to accommodate both wet and dry applications, the WD1950 features a replaceable foam sleeve for wet pickups, making it incredibly versatile for any cleanup job.

The RIDGID WD1950 is also built for user convenience and mobility. The vacuum comes with a durable hose that measures 7 feet in length, allowing users to reach tight spaces without hassle. The hose features a locking design to prevent accidental disconnection during operation. Additionally, the vacuum includes multiple attachments, such as a crevice tool and a utility nozzle, enabling users to customize their cleaning experience according to their needs.

The construction of the RIDGID WD1950 is robust and built to last. It features a sturdy and durable plastic tank that can withstand rough handling on job sites. The rear wheels are designed for stability and maneuverability, making it easy to transport the vacuum from one location to another.

In summary, the RIDGID WD1950 stands out for its powerful suction, large capacity, advanced filtration system, and user-friendly design. Whether it's for construction cleanup, car detailing, or general household chores, this wet/dry vac is equipped to handle the task efficiently. With its combination of functionality and durability, the RIDGID WD1950 is an indispensable tool for anyone in need of a reliable cleaning solution.
Top Page Image Contents