SP6567 16 Gallon Steel.qxd 8/15/07 1:32 PM Page 6
Removing/Installing the Metal Handle
Your Metal handle comes packaged in the carton in the reverse direction. You must pull the metal handle completely out of vac and reinstall the handle in the correct direction, bent area facing away from the back of the vac, before continuing.
Installing Handle
Press and hold release buttons while installing handle into handle receptacles in drum (See illustration).
NOTE: An audible snap of release buttons indicates successful engagement of handle.
Lowering Handle for Storage
To store Wet/Dry Vac, press and hold release buttons while firmly sliding handle down.
Removing Handle
Press and hold release buttons, as shown. While firmly pushing in release buttons, pull handle upwards to remove (see illustration).
Installing Tool Holder
Install tool holder as shown with extension wand holders facing unit.
Tote Snaps | Tote |
| Straps (5) |
| Handle |
Extension
Wand
Storage
Locations
Metal Handle in
Reversed Position
(As Shipped)
Correct
Position
Moving
Position
Storage
Position
6
