Lennox Hearth M1400 manual Get Started, Phone Battery, Install the Battery, Charge the Battery

1 Get Started

Phone Battery

Install the Battery

1.Hold the phone face down.

2.Find the notch on the bottom of the phone. It is a rectangle. Using your thumbnail, pry the cover up from the bottom to remove.

3.Place the battery in the battery casing with the metal contacts facing down. The metal contacts of the battery must touch the metal contacts of the battery casing.

4.Replace the battery cover by sliding the notches into the openings on the top of the battery casing.

5.Snap the cover into place.

Charge the Battery

1. Connect the AC

adapter to the microUSB jack on the

side of the phone.

2. Plug the adapter into a wall outlet.

The battery icon in the

upper-right corner of the screen tells you whether the phone is:

–Charging (the icon is animated)

–Partially charged

–Fully charged

You must have at least a partial charge in the battery to make or receive calls. You can safely recharge the battery at any time, even if it has a partial charge.

Note: Before removing the battery, make sure the phone is powered off.

User Guide 9